Autozero Function; Filter Selection - Accuris W3101A-120 Operation Manuals

parameter menu will be displayed again. It will now be possible to select another parameter
or return to weighing mode by pressing the ON/OFF button.

9.4 Autozero function

Autozero is a correction from a possible deviation from zero.
Different autozero levels can be selected.
1. Select the autozero parameter as described in chapter 10.
The currently set autozero parameter will be shown on the display:
2. Select the desired autozero level. By pressing the MENU or CAL button it will be possible to
scroll through the various levels forward or backward; then confirm your choice with the
PRINT button.
AUTOZERO MENU
Autozero off
Autozero 1
Autozero 2*
Autozero 3*
Autozero 3E*
*
locked in verified balances
3. After having selected the desired autozero, the screen relative to the balance parameters
menu will be displayed again. It will now be possible to select another parameter or return to
weighing mode by pressing the ON/OFF button.

9.5 Filter selection

The balance can be adapted to different environmental conditions thanks to the selection of three
different filters:
1. Select the filter parameter as described in paragraph 10.
Auto zero
Autozero 2
AUTOZERO LEVEL
Autozero off
Light autozero
Average autozero
Heavy autozero
Heavy full-scale autozero
19