3. Once stability has been achieved, the zero value "0.0000" will be displayed. In case stability
is not achieved due to drafts, vibrations, or other types of disturbance, the dashes will
continue to be displayed.
4. Place the objects to be weighed in the container. Read the value of the net weight on the
display.
231.1400
8.1 Manual tare function
This function allows a tare value to be entered manually.
1. Press and hold the TARE button with the weigh pan empty until the beeping stops, and then
release the button.
2. "Manual tare" will be shown on the display:
3. Now insert the desired tare value using the CAL and MENU buttons to increase and
decrease the number, while pressing the TARE button to pass to the next number. During
the entering phase, holding down the TARE button allows you to delete the inserted value.
0.0000
-0-
01-06-10
13:15:24
Manual tare
-0-
2 Sec
01-06-10
13:15:24
g
01-06-10
0.0000
14
g
13:15:24
g