Max-Min Thresholds Function - Accuris W3101A-120 Operation Manuals

10.4 Max-Min thresholds function.

The thresholds function allows you to determine if the weight loaded on the plate is above or
below two thresholds pre-set by the user.
1. Select the thresholds function as described in paragraph 10.
The following screen will be shown on the display:
2. Enter the MINIMUM limit value by using the CAL and MENU buttons to increase and
decrease the value, while pressing the TARE button to pass to the next number. During the
entering phase, prolonged pressure on the TARE button allows you to delete the entered
value.
3. Then press the PRINT button to confirm. The entered value will remain in memory until the
balance is turned off.
4. The following screen will then be displayed.
5. Now insert the MAXIMUM limit using the same procedure described for the insertion of the
MINIMUM limit.
6. Then press the PRINT button to confirm. The entered value will remain in memory until the
balance is turned off.
Note: It is also possible to set the value by using the optional alphanumeric keypad.
Thresholds
01-06-10
0.0000
Enter the minimum limit
Thresholds
01-06-10
0.0000
Enter the maximum limit
45
13:15:24
g
13:15:24
g