Transmission Speed Selection - Accuris W3101A-120 Operation Manuals

The different transmission modes are illustrated below:
TRANSMISSION MODE
Continuous
On demand
Generic printer
Tlp50 printer
Upon request - Glp
Generic printer - Glp
Tlp – Glp printer
NOTE: transmission speed selection (paragraph 9.3)
4. After having selected the desired transmission mode, the screen relative to the balance
parameters menu will be displayed again. It will now be possible to select another parameter
or return to weighing mode by pressing the ON/OFF button.

9.3 Transmission speed selection

Different data transmission speeds can be selected.
1. Select the baud rate parameter as described in paragraph 10.
The currently set transmission speed will be shown on the display:
2. Select the serial data transmission speed (1200-2400-4800-9600 baud). By pressing the
MENU or CAL button you can scroll the different transmission speeds forward or backward;
then confirm the choice with the PRINT button.
3. After having selected the desired transmission speed, the screen relative to the balance
FEATURES
Transmits the weight data in a continuous way
Transmits the weight data only when the PRINT button is pressed
The weight data is printed only when the Busy command is active
The weight data is printed only if the Tlp50 model printer is
connected
Transmits the weight data and the Glp information only when the
PRINT button is pressed
The weight data and the Glp information are printed only when the
Busy command is active
The weight data and the Glp information are printed only if the Tlp50
model printer is connected
Baud rate
1200 Baud
18