Serial Output Setup - Accuris W3101A-120 Operation Manuals

4. After having selected the desired weight unit, the screen relative to the menu of balance
parameters will be displayed again. It will now be possible to select another parameter or
return to weighing mode by pressing the ON/OFF button.
By returning to the weighing mode in the right part of the display, the symbol of the selected
weight unit will be displayed.

9.2 Serial output setup

Different data transmission devices and modes can be selected.
1. Select the serial output parameter as described in paragraph 10.
The currently set transmission mode will be shown on the display:
2. Now by pressing the MENU or CAL button it will be possible to scroll through the serial output
MENU forward or backward.
3. Then press the PRINT button to confirm the desired transmission mode.
UNIT OF
SYMBOL
MEASUREMENT
g GRAMS
ct CARATS
oz OUNCES**
lb POUNDS**
Dwt PENNYWEIGHTS**
ozt TROY OUNCE**
GN GRAINS**
HONG KONG
tl1
TAEL**
SYNGAPORE
tl2
TAEL**
tl3 TAIWAN TAEL**
mo MOMME**
Serial output
Continuous
CONVERSION
FACTOR
1 g =
1.
5.
0.035273962
0.0022046226
0.643014931
0.032150747
15.43235835
0.02671725
0.02646063
0.02666666
0.2667
**not available in verified balances
17