Formula Saving - Accuris W3101A-120 Operation Manuals

6. Then press the PRINT button to confirm.
7. Repeat the operation for a maximum number of 99 ingredients.
Note: During the acquisition of the ingredient, the display of Err10 indicates a negative weight value. Check
not to have made a mistake with the ingredient loading and zeroing procedure.
8. To end, print the value of the individual components and the total value, and press and keep
pressed the PRINT button until the beeping stops. The display will show the following
screen:
9. To exit from the screen and carry out a new formulation, press the ON/OFF button once. To
exit from the program and return to the weighing screen, press the ON/OFF button two
consecutive times.

10.3.2 Formula saving

1. Select the formulation program as described in paragraph 10.
The following screen will be shown on the display:
2. Select the number of the formula to save or modify using the CAL and MENU buttons to
increase and decrease the value, after the word 'Formula'. Then press and keep pressed the
PRINT button until the beeping stops to confirm the selection and enter the 'setup formula'
menu.
Formulation
END
TOT: 20.0000 g

Formulation
Formula:00
Manual
Form. setup
Formula:01
_
01-06-10 13:15:24
P: 0.0000g
01-06-10 13:15:24
01-06-10
40
13:15:24