Verification of the balance is invalid without the "seal".
Balances with a verification requirement must be taken out of operation if:
• The weighing result of the balance is outside the error limit.
Therefore, in regular intervals load balance with known test weight (ca.
1/3 of the max. load) and compare with displayed value.
• The reverification deadline has been exceeded.
8
Tare function (example using a weighing container)
1. The relative weight of the weighing container will be shown on the display.
21.3140
2. Press the TARE button. The word "Tare" will be displayed.
Position of the seal mark for Verified balances models
01-06-10
13:15:24
g
01-06-10
Tare
13
13:15:24