10.7 Maximum load function
The "maximum load" function allows you to measure the maximum breakage load of a solid.
1. Select the maximum load function as described in paragraph 10.
A tare will automatically be carried out and the following screen will be shown on the display
with an indication of the maximum load function at the top left:
2. The breakage weight can now be detected.
3. Press the TARE button to carry out another measurement.
4. Press the ON/OFF button to exit from the maximum load function.
10.8 GLP function (Good Laboratory Practices)
The "GLP" function allows you to save the identifying parameters of the instrument and operator
to be able to print them along with the value of the test results.
1. Select the GLP function as described in paragraph 10.
The following screen will be shown:
Maximum load
0.0000
-0-
Maximum load
23.0356
Glp
Balance ID:
-
01-06-10
13:15:24
g
01-06-10
13:15:24
g
01-06-10
13:15:24
50