Siemens SINAMICS G120C Getting Started page 24

Installing
3.2 Connecting
Factory setting of the terminals
The factory setting of the terminals depends on whether the inverter has a PROFIBUS /
PROFINET interface.
Factory setting of the terminals for G120C USS and
G120C CAN
Fieldbus interface is not active.
Changing the function of terminals
The function of every color-coded terminal can be set.
In order that you do not have to successively change terminal for terminal, several terminals
can be jointly set using default settings.
The factory settings described above for USS and PROFIBUS/PROFINET terminals
correspond to default setting 12 (two-wire control using method 1) or default setting 7
(switchover between fieldbus and jog using DI 3).
See also: Default settings of the terminals (Page 25).
24
Factory setting of the terminals for G120C DP and
G120C PN
The function of the fieldbus interface depends on DI 3.
Getting Started, 04/2014, FW V4.7, A5E34264105B AA
SINAMICS G120C converter