Table of Contents
Advertisement
Installing a Mini PCIe Card
The system board is equipped with 3 Mini PCIe slots: two full-size and one half-size slots.
Here we will demonstrate the installation of a full-size Mini PCIe card (mSATA interface) for
capacity expansion.
1.
Grasp the Mini PCIe card by its edges and align the notch in the connector of the PCIe
card with the notch in the connector on the system board.
2.
Push the Mini PCIe card down and use the provided mounting screws to secure the card on
the system board.
Note:
Note:
The system also has one additional full-size Mini PCIe and one half-size Mini PCIe slot
The system also has one additional full-size Mini PCIe and one half-size Mini PCIe slot
that use the PCIe and LPC interface respectively.
that use the mSATA and LPC interface respectively.
Chapter 3 Installing Devices
Chapter 3
Mounting screw
13
www.dfi.com
Advertisement
Table of Contents
