Table of Contents
Advertisement
Network Stack Configuration
This section configures network stack settings.
When the Network Stack is set to enabled, it will display the following information:
Ipv4 PXE Support
When enabled, PXE boot using IPv4 addressing method will be supported. When dis-
abled, Ipv4 PXE boot option will not be supported.
Ipv6 PXE Support
When enabled, PXE boot using IPv6 addressing method will be supported. When dis-
abled, Ipv6 PXE boot option will not be supported.
PXE boot wait time
Enter the wait time value to abort the PXE boot by pressing the "ESC" key.
Chapter 7 BIOS Setup
Chapter 7
CSM Configuration
This section configures the Compatibility Support Module (CSM) settings.
CSM Support
Enable or disable the CSM support.
Boot option filter
This option sets the boot options: Legacy only, UEFI only, or both UEFI and legacy.
This setting will affect the boot options available for the "Boot Option Priorities" in the
"Boot" menu.
Launch PCI-E NIC PXE
Enable or disable the execution of PXE Option ROM through network interfaces. If
you choose to use UEFI boot, configure network settings using the "Network Stack
Configuration" menu.
Video
Choose to allow the execution of UEFI, Legacy Video Option ROM or none.
36
www.dfi.com
Advertisement
Table of Contents
