And Dali Wiring - Lutron Electronics QSGRK-6D Quick Installation And Operation Manual

Wiring the GRAFIK Eye
Overview of Line Voltage/Mains and DALI Wiring
Two D1 and two D2 connections are
provided for ease of wiring, and to
provide two connecting points; there is
only one DALI link on the unit.
Note: Ballasts and other DALI devices
must NOT obtain power from a line
voltage output on the GRAFIK Eye QS
with DALI.
DALI Bus Wiring
(See page 5 for complete wiring
specification)
Two 1,5 mm (16 AWG)
2
each terminal
D2
D1
DALI devices: ballasts,
drivers, or interfaces
D2
D1
To additional DALI
devices
®
QS with DALI:
®
Line Voltage/Mains
Cables and Load Wiring
4,0 mm
each terminal
L
N
Distribution
Panel
L
N
Terminal labels:
L: Hot/Live
N: Neutral
: Ground
For additional information, see the complete installation and operation guide at www.lutron.com/qs
(12 AWG)
2
GRAFIK Eye QS with DALI Quick Installation and Operation Guide 3
®
100 – 240 V
50 / 60 Hz
Distribution
Panel