Replacing The Battery - MSC IPC370T Operating Instructions Manual

OI: IPC370T

Replacing the battery

When the charge is too low or the battery is empty, the data stored in the CMOS RAM
(e.g. date and time) might not be accurate.
Then the lithium battery must be replaced.
Notice:
Incorrect replacement may lead to risk of explosion.
The battery may be replaced only with an identical battery or with a type
recommended by the manufacturer.
Caution
Ensure that you insert the battery in the right way (see polarity).
Note:
Do not throw lithium batteries into the household waste. They must be disposed of
in accordance with local regulations concerning special waste.
Rev. 1.00 dated 1.7.2004
Installation and Configuration
Page 15 of 38