Test Pins / Test Pads; Fig. 2-4: Test Pins / Test Pads - MSC IPC370T Operating Instructions Manual

Installation and Configuration
2.1.4

Test pins / Test pads

For test purposes of the usual PC supply voltages (±12V, ±5V and +3.3V) there are
corresponding test points at the upper edge of the board.
In addition there is also a GND pin to connect measuring instruments.
Page 12 of 38
-12V +12V
-5V +5V +3,3V
GND
82443BX
OI: IPC370T
Fig. 2-4: Test pins / Test pads
Rev. 1.00 dated 1.7.2004