Table of Contents
Advertisement
OI: IPC370T
2
Installation and Configuration
2.1
Switches and jumpers
2.1.1
BIOS Recovery
In order to force an automatic BIOS update during switch-on of the system,
following steps are necessary:
1. Switch off system
2. Insert BIOS update floppy disk into the disk drive
3. Take off jumper
4. Switch on system
5. Switch off system after successful BIOS update
6. Remove update floppy disk
7. Plug-in jumper again
Rev. 1.00 dated 1.7.2004
82443BX
Installation and Configuration
Fig. 2-1:
BIOS Recovery
Page 9 of 38
Advertisement
Table of Contents
Need help?
Do you have a question about the IPC370T and is the answer not in the manual?