Frame R5I; Inverter Module - ABB ACS880-104 Hardware Manual

Ordering information 221

Frame R5i

Inverter module


As standard, frame R5i inverter modules come with a two-part front cover, the top part of
which also acts as a control panel holder. The holder is fitted with a panel interface board
(ZDPI-01) which enables the construction of a panel bus. The panel bus makes it possible
to control several inverter units from a single control panel (see page 167).
The modules can be ordered without the front covers by specifying option code +0J414. (If
desired, the panel bus can be constructed using FDPI-02 modules which are available
separately.)