Ramp (For Rittal Ts 8 Enclosures) - ABB ACS880-104 Hardware Manual

268 Ordering information
Used with...
400 mm generic
enclosure
600 mm generic
enclosure
800 mm generic
enclosure

Ramp (for Rittal TS 8 enclosures)

The ramp can be used when installing or removing an R8i module.
Note: Do not use the ramp with plinth heights over 100 mm. The ramp is designed for a
plinth height of 100 mm (the standard plinth height of Rittal TS 8 enclosures).
Used with...
All TS 8 enclosures
Qty Kit code
1 A-4-8-315
1 A-6-8-311
1 A-8-8-312
Qty Kit code
1 A-468-8-304
Ordering code
3AXD50000005875
Instruction code: 3AXD50000005874
3AXD50000005876
Instruction code: 3AXD50000005864
3AXD50000005877
Instruction code: 3AXD50000005848
Ordering code
3AUA0000120467
Illustration
Illustration