Dc-Side Components - ABB ACS880-104 Hardware Manual

The control panel can be flush mounted on the cabinet door with the help of a door
mounting kit.
Type
ACS-AP-W
ACS-AP-I
DPMP-01

DC-side components


Frame R6i and R7i inverter modules are connected to the DC bus through fuses. The
design presented in this manual has flush-end fuse blocks bolted to the DC busbars.
A DC switch/disconnector can be installed if quick isolation of the module from the DC bus
is required. One of the auxiliary contacts of the switch is used for monitoring the
open/closed state of the switch.
A capacitor charging circuit must be fitted if
•
the inverter module is connected to the DC bus through a DC switch/disconnector, or
•
the inverter unit is directly connected to the DC bus and the supply unit of the system
does not have a charging capability.
Description
Control panel with
3AXD50000025965
Bluetooth
Control panel
Door mounting kit
(IP55)
Ordering code
3AUA0000088311
3AUA0000108878
Ordering information 235
Illustration