Download Print this page

Additional Information; Contact Information - sauter SW 1000 User Manual

Sound level meter with octave-band analyzer
Hide thumbs Also See for SW 1000:

Advertisement

time (Czas całkowania):
Time for calculating integration data, for example LEQ,
MAX, MIN etc. The integration time may set as infinite.
Measurement (Pomiar) -> Measurement
settings (Ustawienia pomiaru) -> Number of
repetitions (Liczba powtórzeń):
Integration time × Number of repetitions = Total
measurement time
Protocol data: SWN/OCT and CSD
Sound level meter allows for saving data in SWN/OCT
and CSD files. The file format and logging cycle may
be set in Pomiar->Ustawienia pomiaru menu.
SWN/OCT: Integration data saving. The sources of
data are 1 - 3 profiles in the sound level measurement
mode. In the octave-band mode these are all the
octave data/LA
/LB
/LC
eq
eq
0.1 s~24 h.
CSD: Current data saving. The sources of data are 14
sets of measurements defined by the user, in the
octave-band mode these are all octave data and
LA
/LB
/LC
/LZ
. Logging cycle: from 1 minute to
eq
eq
eq
eq
24 h.
SWN/OCT data are integration data (the logging cycle
is the integration time), CSD data are momentary data.
Measurement (Pomiar) -> Alarm threshold
SW 1000_SW 2000-KA-e-1710
Sauter GmbH
Ziegelei 1 Telefon: +49-[0]7433-9933-0
Fax: +49-[0]7433-9933-149 Internet: www.kern-sohn.com
D-72336 Balingen
Email: info@kern-sohn.com
SW 1000 / SW 2000
/LZ
. Logging cycle:
eq
eq
(Próg alarmu):
When the result exceeds the threshold value, LED
status diode shall light red.
Buffer battery of the real time clock (RTC):
The RTC battery usually operates for about 2 years.
When the time displayed by the RTC is mistaken, open
the cover of the battery compartment and replace the
batteries. The battery type is CR1220.

Additional information

1. The microphone is a delicate element which shall be
protected from environmental impacts by means of
storing it in the enclosed bag.
2. Observe instructions and operational guidelines. Do
not allow for the device to fall down, avoid vibrations
and impact loads. Operation above the limit values
may lead to the damage of the product. Do not allow
water or other liquids to penetrate into the device, it
is not waterproof.
3. In order to extend the shelf-life of the device use
high quality alkali batteries. Do not use old and new
batteries at the same time. Take out the batteries if
the device is not used. Batteries left for a longer
period of time in the device may leak and damage
the device.

Contact information

In the case of problems, please contact us at any time.
Kern & Sohn GmbH
Ziegelei 1
D-72336 Balingen
Telephone: +49 7433 9933-0
info@kern-sohn.com
www.kern-sohn.com
5

Advertisement

loading

This manual is also suitable for:

Sw 2000