Printing Data; Beep" Mode; El Backlight; Battery Information - sauter TN-US Instruction Manual

Ultrasonic material thickness gauge
Hide thumbs Also See for TN-US:
Table of Contents

Advertisement

4.9 Print data
At the end of the measuring activity or at the end of the day it may be desirable to
transfer the data to a PC. This will be explained in the following steps. PC transfer is
only possible with the model TN xx0.01 US and not with the model TN xx0.1 US:
1. Before printing, the printer
main body of the meter must be plugged into the socket on the top left-hand
side of the page. The other plug is plugged into the data transmission socket of
the mini printer.
2. Press the key to
3. Use the and
4. By pressing the
current file are transmitted to the printer via the adapter cable and the RS-232
connection and can then be printed out.
5.
This program can be exited at any time with the key and the measuring mode
can be returned to

4.10 "Beep" mode

If the "Beep" mode is activated under ((On)), a short "honk" can be heard each time
the key is pressed, each time a measurement is taken and if the measured value
exceeds the tolerance limit.
This option can be switched on and off
display.

4.11 EL Backlight

This allows it to be used in a dark environment. The button is used to
deactivate the background light as soon as the meter is turned on.
As the EL light consumes a lot of electricity, it should only be switched on when
needed.

4.12 Battery information

Two AA alkaline batteries are required as energy source. After several hours of use,
the display will show the symbol
fuller the battery is. When the battery capacity is exhausted, the following symbol
appears
and starts flashing. The batteries should now be replaced.
When changing the polarity must be observed.
If the device is not used for a longer period of time, the batteries should be removed.
TN_US-BA-e-2020
cable connector (available as an option) on the
activate the data collection functions.
keys to
highlight the desired file.
key, this file is now printed out. All measured values of the
. The larger the black portion in the symbol, the
with the key and the symbol is visible on the
activate and
17

Advertisement

Table of Contents
loading

Table of Contents