Advertisement
MicroSD card status. It is dis-
played while data are being
saved.
Working
status.
Measuring parameters.
Frequency correction.
Time constant.
Range status: one range, auto-
matic indication mode.
Measurement value.
Measurement value in the form of
the bar graph display.
Date and time.
Current screen number and the
total number of screens.
Internal temperature.
Microphone assembly
Put the microphone into TNC socket. Then tighten the
thread.
SW 1000_SW 2000-KA-e-1710
Sauter GmbH
Ziegelei 1 Telefon: +49-[0]7433-9933-0
Fax: +49-[0]7433-9933-149 Internet: www.kern-sohn.com
D-72336 Balingen
Email: info@kern-sohn.com
SW 1000 / SW 2000
voltage
and
: Integration time.
: Measurement time.
Battery replacement
In the sound level meter there are 4 alkali batteries
(LR6/AA/AM3) used. Do not use old and new batteries
battery
at the same time. Unlock and open the cover.
Replace the batteries paying attention to the polarity.
Close and lock the cover.
Operation
Function:
Select Sound level (Poziom dźwięku) mode or
Octave-band (Oktawa).
Calibration:
Start after selecting After the measurement (Po
pomiarze option and calibrator. The calibration
coefficient may also be changed manually.
Measurement (Pomiar) -> Measurement
settings (Ustawienia pomiaru) -> Delay
(Opóźnienie):
The delay may be set within the range from 1 to 60 s. It
is possible to select 4 additional synchronization
options.
Measurement (Pomiar) -> Measurement
settings (Ustawienia pomiaru) -> Integration
4
Advertisement
