User Manual for the Thermographic System VarioCAM
6. Quick Start
6.9
Data Transfer to the Computer
■
For data transfer via the FireWire (IEEE 1394) interface with the help of IRBIS
software (which comes included if rewquested for) should at first be installed following the description
in the respective manual.
■
Another method of the data transfer is the readout of the SD-card with a cardreader.
6.10 Evaluation with Analysing Software IRBIS
■
Install the analysing software IRBIS
■
From menu "File", select submenu "Open..." and open the desired thermograms (*.irb files).
■
From menu "Thermogram", submenu "Palette", select the desired colour palette.
■
Via menu "View", you can display further image elements, measurement data, annotations and
parameters in addition to the thermogram.
■
By pressing the right mouse key on the colour scale, the dialogue "Level/Range", where the
temperature level and range can be adjusted as desired by moving the scroll bar. The adjustment is
also adopted for subsequent thermal images.
■
With the help of the respective functional buttons on the symbol bar, points of measurement, areas,
etc. as well as the display of temperature maximum and minimum can be activated.
■
For inserting the analysed thermal images into your reports, select the function "Copy to clipboard" in
the "Edit" menu. You can also use the report generator.
®
Fig. 10
IRBIS
Software
User Manual
®
hr head
®
on the computer and start it.
© InfraTec GmbH 2015
®
remote/online, this
®
15