InfraTec VarioCAM User Manual page 65

User Manual for the Thermographic System VarioCAM
9 Operation
■ "S" Save – saves a thermal image
■ "V" Visual display – displays the respective status (see Fig. 118 and Fig. 119)
■ "X" External – transmits the alarm value in Kelvin via RS232* from the VarioCAM
■ "A" Acoustic alarm
Fig. 119 Displayed visual alarm when exceeding
and falling short (U/D) of the thresholds
in the entire thermal image
Example for displaying temperature alarm via HyperTerminal
The HyperTerminal is a programme of the operating system and can be called up as follows:
■ Start/Programs/Accessories/Communications/HyperTerminal
Fig. 121 HyperTerminal port settings
User Manual
®
hr head
Fig. 120 Displayed visual alarm by exceeding
the threshold in ROI 1 and by falling
short of the threshold in ROI 3
Fig. 122 recommended HyperTerminal ASCII
configuration
© InfraTec GmbH 2015
® hr
43