InfraTec VarioCAM User Manual page 63

User Manual for the Thermographic System VarioCAM
9 Operation
The values in the various input boxes (figures) can be set by moving the joystick
 
joystick and serves to move among the positions in the input boxes. The
key) is used to jump between the various input boxes. Enter saves the sequence settings. The settings
will be dismissed and the dialogue exited if the
When serial measuring is running, the filenames of the currently saved data are displayed.
Fig. 113 Screen in "Autosave"
On-going serial measuring can be interrupted by CL.
Fig. 114 Dialogue – "Stop Autosave"
Menu item "Compensation"
Fig. 115 Menu "Settings" - "Compensation"
This menu helps to adjust parameters for compensation.
If menu item "Shutter" has been selected, compensation is made with the shutter of the thermographic
camera. The shutter is part of the optical mechanics. It is briefly swiveled into the beam path as a
reference.
User Manual
®
hr head
C button is pressed.
© InfraTec GmbH 2015
 and . Using the
T button (acting as a tab
41