InfraTec VarioCAM User Manual page 50

®
User Manual for the Thermographic System VarioCAM hr head
9 Operation
Files are always saved in a subdirectory. The name of the subdirectory is generated by means of the
current date, e.g., on 22 June 2007 the directory would be generated by the name of 070622aa. The
maximum number of files to be saved in a directory is limited to 100 in order to avoid the strenuous
search in long lists. Within a directory, the files are consecutively numbered, but, due to their trunk name
(2 letters + month + day, e.g., AA0622xx,) they can always be related to the respective directory. Should
a subdirectory be full (e.g., with file AA062299.irb), the next file would be generated in directory 070622ab
by the file name AB062200. Thus, filenames are consecutively numbered, beginning at 00 through 99
and, contrary to the directory, do not have any indication for the year in their names. Therefore, on one
day and fully exhausting the capacity of automatically generating directories and filenames, a maximum
of 26 x 26 x 100 = 67,600 files can be saved in 676 directories.
Please note that with each and every new start of the thermographic system s as well as with each serial
measurement*, regardless of the contents of previously generated directories, a new subdirectory will be
created. Should additional files (VIS, Audio, Screenshot, Data) be saved as extra files, the number of
possible thermal image files in one directory will reduce accordingly*.
Menu item "Load file.."
Fig. 75 Menu "File" – "Load file.."
Fig. 76 Dialogue "Load" – directory structure Fig. 77 Dialogue "Load" - files
After selecting "Load file..", the current directory structure with its contents is displayed in a dialogue
(see Fig. 76). The respective directory and the file to be loaded are selected by using the buttons and by
subsequently confirming this with Enter.
Next to the list of files available in the directory, the preview of selected IRB files is displayed on the right.
28 © InfraTec GmbH 2015 User Manual