InfraTec VarioCAM User Manual page 37

User Manual for the Thermographic System VarioCAM
9 Operation
The C button is used to permanently change between the colour palettes in the live mode. The default
setting when starting the system is the VarioCAM palette.
VarioCAM
BlueRed
Fig. 43 Display of the various available colour palettes
In the live mode, the A
Uniformity Correction, with internal shutter). While Autoimage is running, the temperature display is
adjusted to the current scene so that all temperatures of the scene are included. The function of the
button can be configured in the main menu (see Chapter 9.6.4, Menu "Settings", page 37).
AL runs Autoimage, image calibration and additionally the Autofocus function.
The T button directly activates/deactivates Spots/ROI (see Chapter 9.4, Spot Editor*) as well as,
depending on settings, the laser pointer (option) (also see Chapter 9.6.4, Menu "Settings", page 37).
Pressing the button TL
For switching off the camera, the stream supply has to be interrupted.
Pressing Enter changes from the live mode into the focus mode (see Chapter 9.3, Focus Mode, page
16).
User Manual
BlackWhite
Marked BW
button activates the Autoimage function and the image adjustment (NUC, Non
starts the spot editor - see Chapter 9.4, Spot Editor*, page 17.
© InfraTec GmbH 2015
®
hr head
Iron
Rainbow
A
15