InfraTec VarioCAM User Manual page 69

User Manual for the Thermographic System VarioCAM
9 Operation
The number of configurations that can be saved is dependent on the version of equipment. Configuration
0 contains the default setting and cannot be overwritten.
Please note that loading the default setting will reverse all previously saved individual settings. The default
settings define English to be the system language.
Fig. 133 Dialogue "Start behaviour"
By selecting the menu item "Start..", a dialogue will be shown (see Fig. 133) in which the start behaviour
of the thermographic camera can be determined:
■ "Autofocus"
■ "Autoimage"
■ "AutoLevel"
■ "AutoCalib"
■ "FixLevel"
■ "FixSpan"
For saving the desired start settings press Enter, whereupon the dialogue will close. Subsequently, the
respective configuration acc. to the dialogue in Fig. 132, Dialogue "Save configuration" page 46 is to be
saved.
Menu item "Video mode"*
Fig. 134 Menu „Settings" - "Video mode"
User Manual
®
VarioCAM hr head performs autofocus.
VarioCAM ® hr head adjusts the temperature range to the current measurement
scene (Autoimage).
VarioCAM ® hr adjusts the temperature level to the current measurement scene
(Autolevel).
VarioCAM ® hr head adjusts the calibration range according to the current
temperature scene.
VarioCAM ® hr head starts at the temperature level currently set in the
configuration.
VarioCAM ® hr head starts in the temperature range currently set in the
configuration.
© InfraTec GmbH 2015
®
hr head
47