Operating Software Irbis Remote 3.0; User Interface; Analog Video Display - InfraTec VarioCAM User Manual

When starting the programme, IRBIS
VarioCAM ® hr. Should no connection be possible via the FireWire interface of the computer to the
infrared camera, the programme will be trying, in a second step, to set up communication via the serial
interface.
®
Fig. 136 IRBIS remote – serial RS232 connection – as it appears on the screen
In the case of connection via the serial RS232 interface (Breakout Box* - see Fehler! Verweisquelle
konnte nicht gefunden werden. – page Fehler! Textmarke nicht definiert.), only the keyboard
commands will be transferred to the thermographic system. The video image can be visualised via video
interfaces "S-Video", "VGA" or "PAL/NTSC-FBAS" by means of a suitable replay device.
®
IRBIS remote can only be used if the VarioCAM
PC.

10.2 User Interface

Depending on the activated components, the user interface menu will vary. The menu (see Fig. 135, page
49) is subdivided into three principal areas:
■

Analog video display

■ Menu bar with quick keys
■ Controls for direct control
10.2.1 Analog Video Display
The area analog video display shows the video image as provided by the VarioCAM
processing of the imaged elements within the display screen is not provided for and is not supported by
the IRBIS ® remote programme.
The size of the displayed image can be changed in fixed increments via the button "Zoom" (within the
menu bar).
50
User Manual for the Thermographic System VarioCAM
® remote will check the connection to the thermographic system
®
hr head has been started and connected with the control
© InfraTec GmbH 2015
10 Operating Software IRBIS® remote 3.0*
®
hr. Interactive
®
hr head
User Manual