InfraTec VarioCAM User Manual page 48

Fig. 68 Thermal image in the BlackWhite colour scale and with the isotherm displayed
The help bar shows the most important buttons in this mode (see Fig. 69).
Fig. 69 Help for the isotherm editor
Button movements , 
decreases the range. The respectively active isotherm is displayed below the colour palette.
The S button progressively changes the colour of the isotherm, whereas using
respectively next colour acc. to the sequence shown in Fig. 70.
Fig. 70 Colour palette for isotherms
If an isotherm already exists, a second one is created by pressing TL. Should more than one isotherm
exist, T will switch to selecting the active isotherm. By using TL, another isotherm can be generated. The
possible number of isotherms depends on the model.
A opens an input dialogue in the isotherm editor, which will facilitate a numerical definition of limits of the
currently displayed isotherm.
Fig. 71 Input window for the numerical definition of isotherms
26
change the level of the respectively active isotherm and ,
© InfraTec GmbH 2015
User Manual for the Thermographic System VarioCAM
Isotherm editor
Marking
active isotherm
®
hr head
9 Operation
of the

increases or
S will change to the
User Manual