InfraTec VarioCAM User Manual page 68

Fig. 129 Dialogue "System info"
In menu item "Systeminfo..", system infirmation can be retrieved. By means of an abbreviation, the
respective firmware is identified, followed by its current version:
■ A Firmware of the CPU - version
■ C Companion device driver - version
■ S SSP device driver - Version
■ F FPGA - version
■ M OMI firmware - version
■ B OMI Bootloader - version
■ GUID ID-No.
Menu item "Config"
Fig. 130 Menu "Settings" – "Config"
The menu item "Config" allows to load and save the configuration of the thermographic camera, to make
standard settings and firmware updates.
Fig. 131 Dialogue "Load configuration"
Menu item "Load.." permits to load a configuration
(0 ... 5/9*).
46
User Manual for the Thermographic System VarioCAM
Fig. 132 Dialogue "Save configuration"
Menu item "Save" serves to save the current
configuration (1 ... 5/9*).
© InfraTec GmbH 2015
®
hr head
9 Operation
User Manual