Quick Start; Preparation; Installation Software Irbis ® Remote; Start - InfraTec VarioCAM User Manual

6

Quick Start

The following instructions shall help to quickly familiarise with operating the VarioCAM
obtaining professional results, we recommend to carefully read the entire manual.
6.1

Preparation

You require the following equipment:
®
■ VarioCAM hr head
■ Power supply unit* with LEMO plug
■ IRBIS ® software
6.2 Installation Software IRBIS
■ To be able to handle the camera, the operating software IRBIS
computer or notebook. The software indicates the measuring scenery taken up by the camera
■ The operation of the VarioCAM
remote. Navigate in the main menu with the buttons , , ,
Abb. 4 Die Bedienung der Kamera erfolgt über das Bedienfenster der IRBIS
6.3

Start

■ Conect the camera to a PC or Notebook. Remove lens protective cover.
■ Connect the external power supply unit to the VarioCAM
the red indication showing upwards) to set the electrical power supply. After system initialisation, the
Operating LED, initially flashing green, subsequently turning to permanent green, signals that the
VarioCAM ® hr head is ready for operation
■ Start the software, connect the camera with the software and open the ""Remote Control" window to
operate the camera in the camera-menu.
■ Remove cover from SD card slot, insert SD card into card slot and return cover.
12
User Manual for the Thermographic System VarioCAM
■ SD card reader*
■ SD card*
® remote
® hr head occurs via the "Remote control" of the software IRBIS
© InfraTec GmbH 2015
® remote has to be inastalles on the

and choose the functions with Enter.
®
Software
® hr head (14- pin plug into left socket, with
®
hr head
6. Quick Start
® hr head. For
(Product similar to diaplyed)
®
User Manual