Focus Mode - InfraTec VarioCAM User Manual

9.3

Focus Mode

In the focus mode, larger or smaller object distances will be focused on by respectively moving the
 and . The progress bar marked F left of the colour palette shows the relative position of the
buttons
focus - see Fig. 44.
Fig. 44 Focus mode
 
Button actions and
information field. The loupe in the lower left image corner above the SD card symbol signals zoom
adjustment > 100 %. Additionally, a progress bar Z is displayed left of the colour palette. The adjusted
zoom level does not influence the digitally saved temperature data. They contain the complete image
information (without any zoom).
Fig. 45 Zoom
Button TL opens the spot editor – see Chapter 9.4, Spot Editor*, page 17.
The colour palette can be changed by means of the
Enter returns the system to the live mode – see Chapter 9.4, Spot Editor*, page 17.
16
digitally zoom the image in or out. Magnification levels in % are circulated in the
© InfraTec GmbH 2015
User Manual for the Thermographic System VarioCAM
"Focus" mode
Progress bar
Information field
C button.
®
hr head
9 Operation
User Manual