InfraTec VarioCAM User Manual page 23

User Manual for the Thermographic System VarioCAM
7 Starting up
VarioCAM®
hr
Battery
14 6
LEMO
Fig. 18 VC hr with FireWire cable (and
battery)
Should the thermographic system VarioCAM
unit (power supply via the FireWire interface), make sure that the FireWire cards recommended by
InfraTec are used. Otherwise InfraTec will not grant any functional guaranty.
User Manual
®
hr head
VC hr with FireWire cable (and battery)
The VarioCAM
cable with the 6-pin LEMO socket on the right (each
marked yellow). The head is supplied with power via the
battery or the FireWire cable. An external power supply
unit is not required in this case.
FireWire
®
© InfraTec GmbH 2015
®
hr head is connected via the FireWire
hr head be operated on a PC without any power supply
1