Operation With Breakout Box (Connection Via Rs232) - InfraTec VarioCAM User Manual

7.6

Operation with Breakout Box (Connection via RS232)*

The use of the Breakout Box extends the options of connection of the VarioCAM
outputs PAL/NTSC-FBAS and S Video as well as the digital RS232 interface are accessible via the
Breakout Box.
Please follow the instructions as provided for making the desired connection.
1. At first, connect the thermographic camera and Breakout Box. For this purpose use the included 14-
pine system cable which is to be connected to the 14-pin (left) LEMO socket at the rear of the
thermographic system.
2. Then connect the Breakout Box to the COM interface of the host PC.
3. Now the included power supply unit is connected to the Breakout Box.
4. The camera starts automaticly as soon as the power via the power supply unit is given.
Connection Breakout Box – Option 1
Fig. 20 Breakout Box (S-Video, camera connection, power supply)
Fig. 21 Breakout Box (Trigger; RS232, BNC)
2
User Manual for the Thermographic System VarioCAM
Fig. 19
S-Video
Connection for system cable to the
VarioCAM
Power supply, 12 V DC supply voltage
Trigger T1, T2 (configurable)
Serial interface (RS232)
BNC video connection (PAL/NTSC-FBAS)
© InfraTec GmbH 2015
7 Starting up
®
hr head. The analog
Trigger Cable Breakout-Box –
option 1
®
hr head
User Manual
®
hr head