InfraTec VarioCAM User Manual page 71

User Manual for the Thermographic System VarioCAM
10 Operating Software IRBIS® remote 3.0*
10 Operating Software IRBIS
The IRBIS ® remote software enables remote control of the VarioCAM
(based on the image displayed) via or onto a notebook/PC.
10.1 Programme Start
IRBIS ® remote can be started either via the created desktop link or the programme link of the start menu.
®
Fig. 135 IRBIS remote FireWire connection as it appears on the screen
Please note that the data transfer rate of the programme is limited to max. 25 Hz. However, the frequency
that can be displayed is dependent on the processor capacity and the graphic card of the computer involved.
User Manual
®
hr head
® remote 3.0*
© InfraTec GmbH 2015
® hr head as well as image transfer
49