InfraTec VarioCAM User Manual page 12

Interfaces
The thermographic system has the following interfaces:
■ Composite Video, S Video, VGA
■ Input for external trigger signal/trigger output* (TTL/CMOS, 5 V)
■ FireWire (IEEE 1394)
■ RS232*
■ Headset socket
IEEE 1394 Breakout-Box
Abb. 1: Camera-Interface
With the exception of FireWire (IEEE 1394), Headset and WLAN, parallel use of all interfaces is possible
by means of a Breakout Box. The Breakout Box* is connected to the thermographic system with a 14-pin
system cable*. Voltage is then supplied to the Breakout Box from the external power supply unit*. The
analog image information is available as Composite Video, S-Video or VGA signal. Suitable monitors can
be connected to the Breakout Box with standard cables (see Chapter 7.6, Operation with Breakout Box
(Connection via RS232)*, p. 2).
The FireWire (IEEE 1394) interface*, in connection with the software packages IRBIS
®
IRBIS online*, permits to remote-control the thermographic system and the real-time transfer* of digital
image information to a PC.
8
User Manual for the Thermographic System VarioCAM
SD-drive
© InfraTec GmbH 2015
®
hr head
3. Technical Description
®
remote* and
User Manual