Stop Mode And Data Storage - InfraTec VarioCAM User Manual

9.5

Stop Mode and Data Storage

The S button switches directly from the live and focus modes to the stop mode.
The stop mode freezes further image input, the image content (except date, time and info box) will not be
updated further. Using C
Fig. 50 Stop mode
As in the live mode, the temperature level of the displayed scale of the thermal image can be set by the
buttons ,  and the temperature range by ,
By pressing the C button for a longer time (CL), the selection of colour palettes will circulate and can be
chosen from.
In order to save thermal images with the VarioCAM
card slot. Otherwise
(see Fig. 51).
Fig. 51 Message if SD card
is missing
Upon starting the system or with each card change, the status of the SD card will be displayed for a few
seconds:
Fig. 54 Status SD card
20
or Enter changes from the stop mode into the live mode.

an error message
Fig. 52 Message if SD card
in the slot is write-
protected
© InfraTec GmbH 2015
User Manual for the Thermographic System VarioCAM
Stop mode
in the stop mode.
® hr, an SD card must have been inserted into the
will be displayed if
Fig. 53
®
hr head
9 Operation
any saving is attempted
Symbol for write-
protected SD card
User Manual