Figure 4-1 Pipe Mounting And Mounting Locations For Transmitter - Siemens FUG1010 IP65 NEMA 4X Operating Instructions Manual

Installing/Mounting
4.5 Mounting the Transmitter
①
②
③
Figure 4-1
Note
Use conduit fittings or cable glands on all cables.
NOTICE
Weather Seal Malfunctions
Incorrect installation of weather seals may result in failure to meet to IP65 standards and
damage to the equipment.
Install weather tight seals at all unused holes using proper cable conduit and close
additional holes to IP65 standards.
38
④
2-in (6cm) pipe
⑤
Transmitter
⑥
Mounting Plate
Pipe Mounting and Mounting Locations for Transmitter
Cable Entry Ports
Mounting Flange (also use for wall mounting)
U-Bolt Assembly for standard 2-in (6 cm) mounting pipe
Operating Instructions, 01/2013, A5E02951519-AC
FUG1010 IP65 NEMA 4X