Figure 5-21 Direct Mount 180° Opposed With Mounting Tracks - Siemens FUG1010 IP65 NEMA 4X Operating Instructions Manual

Connecting
5.5 Sensor Installation
1. Perform all required menu programming steps up until the point where you respond to the
2. Make a note of the reported Number Index displayed in the [Install Sensor] menu. Check
Note
Some sensors require a right-angle adapter. This adapter should be installed before
placing the sensors in the tracks.
76
①
To SITRANS F Transmitter
②
7ME39600CK Series Cable (992CNF)
③
Mounting Strap Guide
④
Sensor Clamp
⑤
7ME3950 Series Sensor Upstream
⑥
7ME39600M Series Mounting Track
(1012TN, 1012TNH)
Figure 5-21 Direct Mount 180° opposed with Mounting Tracks
[Install Complete?] prompt.
to ensure that you have a matched set of sensors. They both should have the same serial
number but marked with either an "A" or "B" (e.g. 100A and 100B).
⑦
7ME3950 Series Sensor Downstream
⑧
Flow direction
⑨
7ME39600M Series Mounting Track
(1012TN, 1012TNH)
⑩
REF Hole Index Pin
⑪
Ultrasonic Couplant
⑫
Pipe
Operating Instructions, 01/2013, A5E02951519-AC
FUG1010 IP65 NEMA 4X