Table 7- 2 Example #1 - Density (Kg-M/M3) Vs. Pressure And Temperature - Siemens FUG1010 IP65 NEMA 4X Operating Instructions Manual

SYNTAX RULES
Syntax for entry of the pressure and temperature index array is:
cv pres_grid[i] pressure
where i = 0 to 9
cv temp_grid[j] temp
where j = 0 to 9
Syntax for entry of the density and Z factor values is:
cv dens_grid[k] density
where: k = 0 to 9
cv z_grid[k] zfactor
where: k = 0 to 9
Note
To simplify the creation of the AGA8 table file, the data can be arranged with comma
separators indicating the next item in the array. In this way the "cv" command does not have
to be issued for each data point.
For example, the string below loads all temperature points for the entire temperature array
from point 0 to point 9 or (0 to 87 deg C).
cv temp_[0] 273.0, 283.0, 293.0, 303.0, 313.0, 323.0, 333.0, 343.0, 353.0, 363.0
Table 7- 2 Example #1 - Density (kg-m/m
100
273 5.4641 13.7105
283 5.2928 13.2438
293 5.1324 12.8109
303 4.9819 12.4082
313 4.8402 12.0322
323 4.7067 11.6801
333 4.5806 11.3497
343 4.4612 11.0388
353 4.3481 10.7456
363 4.2408 10.4688
FUG1010 IP65 NEMA 4X
Operating Instructions, 01/2013, A5E02951519-AC
i
i
k
k
) vs. Pressure and Temperature
3
250 400 550
22.4055 31.5813
21.5764 30.3107
20.8158 29.1586
20.1146 28.107
19.4653 27.1416
18.8618 26.251
18.299 25.4258
17.7724 24.6582
17.2785 23.9418
16.8138 23.2712
700 850 1000
41.2659 51.4778 62.2197
39.462 49.0368 59.0296
37.8464 46.8787 56.2454
36.3869 44.9499 53.7836
35.059 43.2106 51.5835
33.8433 41.6306 49.5998
32.7244 40.186 47.7979
31.6897 38.8579 46.1506
30.729 37.631 44.6363
29.8337 36.4927 43.2375
Functions
7.1 Gas Parameters Menu
1150 1300 1450
73.4705 85.1762 97.2428
69.4174 80.1557 91.1746
65.9241 75.8769 86.0497
62.8666 72.1668 81.6406
60.1575 68.9049 77.7902
57.7324 66.0045 74.3861
55.5432 63.4009 71.3457
53.5524 61.045 68.6067
51.731 58.8988 66.121
50.0554 56.9319 63.8507
99