Operating Modes - ABB TZIDC-200 Commissioning Instructions

Commissioning
6.1.1

Operating modes

Selection from the operating level:
• Press
• Press and release
• Release
• The position is displayed in % or as a rotation angle
Operating mode
1.0
Control mode
with adaptation (the control parameter)
1.1
Control mode
without adaptation (the control parameter)
1.2
Manual adjustment
Adjust via
1.3
Manual adjustment
Adjust via
1) Since self-optimization in operating mode 1.0 is subject to several factors during operation and mismatches could
result over a longer period, we recommend that this operating mode only be activated over several hours and be
followed by the mode 1.1
2) Position not active
3) For high speed mode: Press
24 - EN
and hold
rapidly as often as required. The selected operating mode is displayed
1)
1)
2)
in the operating range.
3)
or
2)
in the sensor range.
3)
or
and simultaneously
TZIDC-200, TZIDC-210, TZIDC-220
Mode indicator
° C
%
mA
conf
°
C
%
mA
conf
°
C
%
mA
conf
° C
%
mA
conf
CI/TZIDC-200/210/220-EN
Position indicator
°
C
%
mA
conf
° C
%
mA
conf
°
C
%
mA
conf
° C
%
mA
conf