ABB CoriolisMaster FCM2000 Operating Instructions Manual page 86

Parameterization
Parameter
Submenu
Status
Error log
Number: 3
Warning Register
Number: 1
Power outage
5
Status
Reset
86
Value range / input type
7 (Set) Example
Temp.measurement
9a (current)
Density measurement
9b (current)
Density < 0.5 kg/l
4 (Set) Example
Ext. Cut-off
Reset
Yes → ENTER
CoriolisMaster FCM2000
Note
The following queries can be performed:
• Error log
• Warning Register
• Power outage
Displays the sum of all detected and active errors.
Use „ENTER" to display the first error with its error
number, error status (active or set) and name.
Display If additional errors have been registered they can
be viewed by scrolling with the „STEP" and
„DATA" keys.
Important:
The sequence in which the warnings are
displayed does not correspond to the
priority of the warnings.
Display the sum of all detected and active
warnings. Use „ENTER" to display the first
warning with its warning number, warning status
(active or set) and name.
Important:
The sequence in which the warnings are
displayed does not correspond to the
priority of the warnings.
Display
Display the number of power outages since the
last reset.
The error and warning registers as well as the
mains interrupt counter can be reset.
D184B111U02