Disposal; Information On Weee Directive 2002/96/Ec (Waste Electrical And Electronic Equipment); Safety Instructions For Transport; Safety Information For Electrical Installation - ABB CoriolisMaster FCM2000 Operating Instructions Manual

Safety
Pos: 5.28 /Sicherheit/Allgemein/Entsorgung @ 22\mod_1222691515053_3101.doc @ 219400 @ 23

1.11 Disposal

ABB Automation Products GmbH actively promotes environmental awareness and has an
operational management system that meets the requirements of DIN EN ISO 9001:2000,
EN ISO 14001:2004, and OHSAS 18001. Our products and solutions are intended to have
minimum impact on the environment and persons during manufacturing, storage, transport, use,
and disposal.
This includes the environmentally friendly use of natural resources. ABB conducts an open
dialog with the public through its publications.
This product/solution is manufactured from materials that can be reused by specialist recycling
companies.

1.11.1 Information on WEEE Directive 2002/96/EC (Waste Electrical and Electronic Equipment)

This product/solution is not subject to the WEEE directive 2002/96/EC and relevant national
laws (e.g., ElektroG in Germany).
The product/solution must be disposed of at a specialized recycling facility. Do not use
municipal garbage collection points. According to the WEEE Directive 2002/96/EC, only
products used in private applications may be disposed of at municipal garbage facilities. Proper
disposal prevents negative effects on people and the environment, and supports the reuse of
valuable raw materials.
If it is not possible to dispose of old equipment properly, ABB Service can accept and dispose of
returns for a fee.
Pos: 5.29 /Sicherheit/Durchfluss/FCM2000/Sicherheitshinweise zum Transport (Durchfluss) @ 7\mod_1174894735718_3101.doc @ 74253 @ 2

1.12 Safety instructions for transport

Observe the following instructions:
• The center of gravity is off center.
• The flow direction must correspond to the direction indicated on the device, if labeled.
• Comply with the maximum torque for all flange connections.
• Install the devices without mechanical tension (torsion, bending).
• Install flange devices with coplanar counter flanges.
• Only install devices for the intended operating conditions and with suitable seals.
• Secure the flange bolts and nuts against pipeline vibrations.
Pos: 5.30 /Sicherheit/Durchfluss/Allgemein/Sicherheitshinweise zur elektrischen Installation (Durchfluss) @ 0\mod_1129733762419_3101.doc @ 3267 @ 2

1.13 Safety information for electrical installation

Electrical connections may only be established by authorized specialist personnel in
accordance with the electrical circuit diagrams.
The electrical connection information in the manual must be observed; otherwise, the applicable
protection type may be affected.
Ground the measurement system according to requirements.
Pos: 5.31 /======= Seitenumbruch ======== @ 0\mod_1126532365768_3101.doc @ 3830 @
14 CoriolisMaster FCM2000 D184B111U02