Section 5 Maintenance; Preventive Maintenance; Hardware Indicators; Ci801 Fci Module Leds - ABB S800 I/O Manual

Preventive Maintenance

Refer S800 I/O Getting Started (3BSE020923*).

Hardware Indicators

CI801 FCI Module LEDs

The CI801 FCI has indicators for fault, operational state, power condition, and
PROFIBUS communication traffic.
shows the location of the LEDs on the module.
F (Fault)
R (Run)
P (Power ok)
T (Traffic)
(1) The F-LED lights up at power up, restart of the module, or when the module goes to Error state.
At the start up, the module does a self test; if the self test is OK, the module turns off the F-LED.
3BSE020926-600
Table 15. Standard LEDs on CI801 FCI Module
LED Color
Red
Green
Green
Yellow

Section 5 Maintenance

Table 15 describes the LEDs, and
Fault in the module
Operational state
Internal power OK
Receive transmit data on PROFIBUS
Figure 20
Description
(1)
71