ABB S800 I/O Manual page 83

Section 5 Maintenance
Physical Connections
Connect the PC to the CI801, using a TK212/TK212A cable and the service adapter
(FS801+TK802) connected between the service port (PROFIBUS connection) on
CI801 and the COM1 or COM2 on the PC. Set the station address on CI801 to 0.
Figure 23. CI801 Connection
Load of firmware
There are two different upgrade instructions for the CI801, depending on its Product
Revision (PR:x).
Loading the BASE Firmware for CI801 PR:F or later and CI801ZPR:B or later
The loading of the new firmware takes 3 to 4 minutes.
The following messages are displayed during the download:
•
•
•
3BSE020926-600
PC
Initialization of target
Load image file
Download finished successful
TK212/TK212A
TK802
FS801
Load the CI801 Software Upgrade
CI801
Power Supply
PROFIBUS
24 V
83