NEC Univerge SV9100 Installation Manual page 49

The call recorder will be listed in the Installed Call Recorder section. In the lower Trunk Licensing
section, click the Call Recorder field next to each trunk and select the call recorder that will be
associated with that trunk. To license each trunk for call recording, you will need to enable the check
box in the licensed column. To check or change the trunk type, click Configure / Telephone System /
PBX's / PBX / Devices / Trunks / Create or Edit. Any trunks that are not licensed will not be recorded.
Once the trunk licensing is configured, click the edit button next to the recorder that was added in
Installed Call Recorders. Enter the name of the PC that has the call recording software installed and
click Test Connection.
49 | P a g e