NEC Univerge SV9100 Installation Manual page 40

The call recording software will use these IP addresses to determine the direction of the calls. In the
example below, the port mirror is connected to a network card in the PC using the following network
configuration:
IP Address 10.0.0.10, Subnet 255.255.255.0, Default Gateway 10.0.0.1
Using a LAN Mask of 10.0.0.255 will allow communication from an address using a 10.0.0.x address.
The public address that the internet connection is using is 91.85.64.173. The IP address of the PBX in
this setup is 10.0.0.150 and SIP carriers address is 83.166.160.248. These are the two IP entries in
the TSP Gateway box. After making any changes click the OK button.
To apply the changes, the call recording service has to be restarted, this would mean that any calls that
are currently being recorded will not be available for call playback. If you click No then the changes will
be saved but will not be applied until the service is restarted. The service can be manually restarted
from the File menu in Calls.
40 | P a g e