Volume Names - NEC Univerge SV9100 Installation Manual

Volume Names

When archives are configured to run, a backup volume name has to be entered. This backup volume
name is appended to the backup folder name that is specified. If an archive was carried out for example
for all call recordings in August 2008 then the volume name for that backup should be identified as
something like Aug08. The media that is used should be labelled as volume Aug08. If a call that is
archived on to this media and had been deleted from the Call Recording server and a user requests to
play it, MyCalls will prompt for the media Aug08 to be inserted. When an archive media becomes full,
it should be removed from the Call Recording Server. The administrator should then get the new media
ready and decide on the new volume name. The volume name should be changed in the Backup
Volume Name section of the Backup Call Recordings configuration page. The media should be the
labelled with the new name and inserted in the Sense PC. The Maximum Volume Size can also be
configured, the Maximum Volume Size is the size a volume will grow to before its name is changed.
For example the settings show in the screenshot below would firstly backup to e:\backups\Jan08.0000
once the folder jan08.0000 reached a size of 1000MB, another folder would be created called
e:\backups\Jan08.0001 and this process will keep incrementing every time the folder reaches 1000MB
in size. The purpose of this is to stop the number of files contained in the volumes becoming too high.
57 | P a g e