Programming Procedure - Mitsubishi QD60P8-G User Manual

7 PROGRAMMING

7.1 Programming Procedure

This section explains the programming procedure for the QD60P8-G.
In the following procedure, create the program that performs the initial setting of the
QD60P8-G, then turns ON the operating condition setting request flag (Y1), and turns
ON the count enable (Y18 to Y1F) to start count operation.
7 - 2
Start
Do you use the comparison
output function?
YES
Comparison output selection setting
Comparison output setting value setting
Do you use the movement
averaging processing function?
YES
Movement averaging processing selection setting
Number of movement averaging processing setting
Do you use the pre-scale function?
YES
Pre-scale function selection setting
Pre-scale setting value setting
Do you use the alarm output function?
YES
Alarm output selection setting
Alarm output setting value upper/upper limit setting
Alarm output setting value upper/lower limit setting
Alarm output setting value lower/upper limit setting
Alarm output setting value lower/lower limit setting
Do you use the count cycle
change function?
YES
Count cycle change function selection setting
Count cycle setting value setting
Turn ON the operating condition
setting request flag (Y1).
Turn ON the count enable (Y18 to Y1F).
Read the sampling pulse number,
accumulating count value and input pulse value.
End
NO
NO
NO
Initial setting
NO
NO
MELSEC-Q
7
7 - 2