Auto Refresh Setting - Mitsubishi QD60P8-G User Manual

6 UTILITY PACKAGE (GX Configurator-CT)

6.5 Auto Refresh Setting

• Sampling pulse number
• Comparison output selection
• Comparison output setting value
• Movement averaging processing selection
• Number of movement averaging processing
• Pre-scale function selection
• Pre-scale setting value
• Accumulating count value
• Input pulse value
• Overflow detection flag
• Counter reset request
6 - 14
[Purpose]
Set the QD60P8-G buffer memory to be automatically refreshed, for each
channel.
There are the following buffer memory items to be automatically refreshed for
each channel.
These auto refresh settings eliminate the need for reading by a sequence
program.
[Operating procedure]
"Start I/O No.*"
* Enter the start I/O No. in hexadecimal.
[Setting screen]
• Carry over detection flag
• Carry over reset request
• Error code
• Alarm output selection
• Alarm output flag
• Alarm output setting value upper/upper limit
• Alarm output setting value upper/lower limit
• Alarm output setting value lower/upper limit
• Alarm output setting value lower/lower limit
• Count cycle change function selection
• Count cycle setting value
"Module type" "Module model name"
MELSEC-Q
Auto refresh
6 - 14